Mig / Tig

Products

Contact us

TIG

MIG/TIG WELDING WIRES




Ask for the Quotations the products you are interested in and fill the form below

MIG

	ER-304 L Tig & Mig ER 304L Properties	Description: For welding of Stainless Steel plates, sheets, pipes, tubes of plants and quiipment for chemical, fertiliser, oil refineries, food, dairy, kitchen, hospital and weld joints are of food grade quality.

	ER-308 Tig & Mig ER-308 Properties	Description: Deposited metal is similar to 308L but contains slightly higher carbon level, for economical weld joints of common austenitic stainless steel grades referred to as 18/8 steels

	ER-309 Tig & Mig ER 309 Properties	Description: Deposited material is similar to 309L but contains slightly higher carbon level, for economical weld joints of higher alloyed austenitic stainless steels, since it overmatches the corrosion resistance, if not exposed to very high temperatures.

	ER-309 LS Tig & Mig A5.9-ER 309L Si Properties	Description: For Welding of 25 Cr/12 Ni alloys in wronughtforms or cast forms Welding of 18 Cr/8 Ni base stainless steels effected by severe corrosion conditions. Can also be used for dissimilar steels such as 18/8 to mild steel /other steels. Clading steels to have non corrosive deposits. Welding the clad side of 18/8 clad steels.

	ER-310 Tig & Mig A5.9-ER 310 Properties	Description: For Welding of austenitic steels of 25 Cr/20 Ni type i.e. AISI 310. Deposit is heat restistant in oxidising sulphur free atmosphere up to 1200慢. The molten pool is clear and deposit is free from porosity.

	ER-312 Tig ER-312 Properties	Description: an ideal alloy suitable for joining almost all grades of steels i.e. tool/ spring, manganese/high speed/cast/unidentifid and difficult to weld. Most suitable for repairs of dies and moulds.

	ER-316 Tig & Mig ER 316 Properties	Description: For welding of molybdenum bearing austenitic stainless steels. The weld metal is similar to 316L but contains slightly higher carbon level.

	ER-316 LS Tig & Mig A5.9-ER 316L Si Properties	Description: For welding of low carbon molybdenum bearing austenitic metal is designed to contain, considerable ferrite for high crack residtance in 316L joining and cladding.

	ER-410 Tig & Mig ER-410 Properties	Description: For surfacing and overlaying applications on 13 Cr steel components subjected to corrosion and abrasion/scaling. Ideal for valves, turbine parts, pumps bodies etc.

	ER-347 Tig & Mig A5.9-ER 347 Properties	Description: For welding of 18Cr/8Ni stainless steels stablised with Niobium and Titanium. Deposited metal is corrosion and heat resistant.

	ER 70S-6 Prima-Mig Wire A5.1.18-93: ER 70S-6 Properties	Description: A copper coated solid wire for continuous Welding with Co2 Shield Gas. Suitable for all position welding. Smooth flow with stable arc and minimum spatter are its special characteristics. Thin and uniform copper coating ensures good conductivity useful for high speed feeding. Gives excellent radiographic quality welds. Applications: Suitable for welding of Mild Steel, Carbon Steels and Low Alloy Steels including structural steels with tensile strength upto 540 N/mm2; and for welding steel Grade(s) EH36, EH32, EH27S, E (and any corresponding strength grade(s) of lower toughness), using semi-automatic gas metal arc welding. (Approved also for automatic multirun welding in the downhand position only). Approved by: Lloyd𠏋 Register of Shipping Grade 3, Grade 3Y MS.(Approved also for automatic multirum Welding in the down hand position only) Det Norske Veritas.(DNV) Research Designs & Standards Organization(RDSO).(Class 1 as per IRS: M-46-03) Bharat Heavy Eelectricals Ltd. Trichy.(Certificate Awaited)

Send Your Query

Your Name :	*
Organization :
Address :
Phone :
Fax :
Your Email :	*
Profile :	*
Message :

Home || Company Profile || Mig/Tig Welding || Stic Electrodes || Accessories || Contact us || Resources

All Rights Reserved. Contents © to VARUN ELECTRODES Pvt. Ltd.