CLASSIFICATION |
AWS:A 5.9 |
ER -308L |
IDENTIFICATION: NAME PRINTED |
CURRENT CONDITION DC (+) |
Characteristics:
Excellent resistance to corrosion & Oxidation upto 800° C. It is extensively used in dissimilar metal joining between MS & low alloy steel and stainless steel. The weld is radiographic quality.
Typical Applications:
Welding AISI 301, 302, 304, 308, 308L and their equivalents stainless steel grades
Weld Chemistry: (%) |
|||
C |
0.03 Max |
Mn |
1.0-2.5 |
Si |
0.30 – 0.50 |
S |
0.03 Max |
P Ni Cu |
0.03 Max 9.0 – 11.0 0.5 Max
|
Mo Cr |
0.50 Max 19.5-22.0 |
Current Range (Amps) |
|||
0.80 mm |
1.00 mm |
1.20 mm |
1.60 mm |
50-80 |
80-220 |
120-375 |
150-375 |
Available size |
: | DIA:0.80mm/1.0mm/1.2mm/1.6mm/2.0mm (Continuous) |
Welding Current |
: | 1.6,2.0,2.5,3.15 (Cut Length of one Meter) |
Shield Gas |
: | DC (+) |
Net Weight wire |
: | ARGON. + OXYGEN OR ARGON |
Packing |
: | 12.5 TO 15 Kgs. PER Spool |
Precaution |
: | Winding on plastic Spool, Sealed in polythene bag, then packed in corrugated box which is further sealed with shrink film. To be stored in dry place |
CLASSIFICATION |
AWS/A- 5.9 |
ER -309 |
IDENTIFICATION: NAME PRINTED |
CURRENT CONDITION DC (+) |
Approved and Certified by:
Research Designs & Standards Organisation.
Characteristics:
Prima SS- MIG/MAG : Excellent resistance to corrosion & oxidation upto 11000C. It is extensively used in dissimilar metal joining between MS & Low alloy steel and stainless steel. The weld is Radiographic quality.
Typical Applications:
Overlaying and buffering applications, welding straight chromium steels etc.
Weld Chemistry: (%) |
|||
C |
0.12 Max |
Mo |
0.50 Max |
Mn |
1.5-2.0 |
Ni |
12.0-14.0 |
Si S P |
0.30-0.50 0.30 Max 0.03 Max |
Cr Cu
|
23.0 – 25.0 0.5 Max |
Current Range (Amps) |
|||
0.80 mm |
1.00 mm |
1.20 mm |
1.60 mm |
50-80 |
80-220 |
120-375 |
150-375 |
Available size |
: | DIA:0.80mm/1.0mm/1.2mm/1.6mm/2.0mm (Continuous) |
Welding Current |
: | 1.6,2.0,2.5,3.15 (Cut Length of one Meter) |
Shield Gas |
: | DC (+) |
Net Weight wire |
: | ARGON. + OXYGEN OR ARGON |
Packing |
: | 12.5 TO 15 Kgs. PER Spool |
Precaution |
: | Winding on plastic Spool, Sealed in polythene bag, then packed in corrugated box which is further sealed with shrink film. To be stored in dry place |
CLASSIFICATION |
AWS/A- 5.9 |
ER -316 L |
IDENTIFICATION: NAME PRINTED |
CURRENT CONDITION DC (+) |
Characteristics:
Prima SS – MIG 316 Stainless Steel Filler wire suitable for welding AISI 316, 316 L and equivalent stainless steel grades.
Typical Applications:
It is majorly used for welding molybdenum bearing austenitic stainless, Ideally suitable for welding of 316, 316 L grade stainless steel material.
Weld Chemistry: (%) |
|||
C |
|
Mo |
2.00 – 3.00 |
Mn |
1.00 - 2.50 |
Ni |
11.0-14.0 |
Si S P |
0.30 - 0.65 0.30 Max 0.03 Max |
Cr Cu
|
18.0 – 21.0 0.75 Max |
Current Range (Amps) |
|||
0.80 mm |
1.00 mm |
1.20 mm |
1.60 mm |
50-80 |
80-220 |
120-375 |
150-375 |
Available size |
: | DIA:0.80mm/1.0mm/1.2mm/1.6mm/2.0mm (Continuous) |
Welding Current |
: | 1.6,2.0,2.5,3.15 (Cut Length of one Meter) |
| Shield Gas |
: | DC (+) |
Net Weight wire |
: | ARGON. + OXYGEN OR ARGON |
Packing |
: | 12.5 TO 15 Kgs. PER Spool |
| Precaution |
: | Winding on plastic Spool, Sealed in polythene bag, then packed in corrugated box which is further sealed with shrink film. To be stored in dry place |
CLASSIFICATION |
AWS/A- 5.9 |
ER -312 |
IDENTIFICATION: NAME PRINTED |
CURRENT CONDITION DC (+) |
Characteristics:
Filler wire with 18 Cr 8 Ni depositing metal with good amount of ferrite contents and is highly resistant to weld metal cracks and fissures
Typical Applications:
Ideally suitable for welding unknown steels, difficult to weld steels, dies and spring steels, Steels of similar compositins.
Weld Chemistry: (%) |
|||
C |
0.15 Max |
Mo |
0.75 Max |
Mn |
1.00 – 2.50 |
Ni |
8.00 – 10.50 |
Si S P |
0.30 – 0.65 0.03 Max 0.03 Max |
Cr Cu
|
28.0 – 32.0 0.75 Max |
Current Range (Amps) |
|||
0.80 mm |
1.00 mm |
1.20 mm |
1.60 mm |
50-80 |
80-220 |
120-375 |
150-375 |
Available size |
: | DIA:0.80mm/1.0mm/1.2mm/1.6mm/2.0mm (Continuous) |
Welding Current |
: | 1.6,2.0,2.5,3.15 (Cut Length of one Meter) |
Shield Gas |
: | DC (+) |
Net Weight wire |
: | ARGON. + OXYGEN OR ARGON |
Packing |
: | 12.5 TO 15 Kgs. PER Spool |
Precaution |
: | Winding on plastic Spool, Sealed in polythene bag, then packed in corrugated box which is further sealed with shrink film. To be stored in dry place |
CLASSIFICATION |
AWS/A- 5.9 |
ER -410 |
IDENTIFICATION: NAME PRINTED |
CURRENT CONDITION DC (+) |
Characteristics:
Filler wire with 12 Cr alloy type air hardening steel. Majorly advised to be performed with pre heat anf post heat heat treatments as per the applications.
Typical Applications:
Suitable for welding AISI-410 and similar composition alloys. Also used for deposition of overlays on carbon steels to resist corrosion erosion or abrasion.
Weld Chemistry: (%) |
|||
C |
0.12 Max |
Mo |
0.75 Max |
Mn |
0.60 Max |
Ni |
0.60 max |
Si S P |
0.50 Max 0.03 Max 0.03 Max |
Cr Cu
|
11.5 – 13.5 0.75 Max |
Current Range (Amps) |
|||
0.80 mm |
1.00 mm |
1.20 mm |
1.60 mm |
50-80 |
80-220 |
120-375 |
150-375 |
Available size |
: | DIA:0.80mm/1.0mm/1.2mm/1.6mm/2.0mm (Continuous) |
Welding Current |
: | 1.6,2.0,2.5,3.15 (Cut Length of one Meter) |
Shield Gas |
: | DC (+) |
Net Weight wire |
: | ARGON. + OXYGEN OR ARGON |
Packing |
: | 12.5 TO 15 Kgs. PER Spool Winding on plastic Spool, Sealed in polythene bag, then packed in corrugated box which is further sealed with shrink film. To be stored in dry place |